Artwork Specs
CD Artwork
All artwork must be minimum 300 dpi (CMYK)
Accepted file types: PDF, PSD, TIF, JPG, PNG
CD Artwork total image size: 118mm x 22mm centre hole.
For CD Artwork, please do not cut out the inner hole since
our software will mask the unprintable areas automatically.
Bleed Area should be 2mm from outer edge, 4mm from centre hole.
Text must be at least 2mm away from the outer edge and at least
4mm from the centre hole.
2 Page Front Insert (Double Sided):
Overall finished size 121mm (w) x 121mm (h). Please allow an
additional 2mm for the bleed area on each edge.
The overall size of your image should be 125mm (w) x 125mm
(h).
Trayliner (Rear Insert for Jewel Cases):
Finished size 151mm (w) 118mm (h) spine element 6mm (w) 118mm
(h). Please use an appropriate size font for the spine writing (no more
than 8 point). Please also allow an additional 2mm bleed area on each
edge.
The overall size of your image should be 155mm (w) x 122mm
(h).
DVD Artwork
All artwork must be minimum 300 dpi (CMYK)
Accepted file types: PDF, PSD, TIF, JPG, PNG
DVD Artwork total image size: 118mm x 22mm centre hole.
For DVD Artwork, please do not cut out the inner hole since our software will
mask the unprintable areas automatically.
Bleed Area should be 2mm from outer edge, 4mm from centre hole.
Text must be at least 2mm away from the outer edge and at least 4mm from the
centre hole.
DVD Wraps:
Standard DVD cases
Finished size 273mm(w) x 183mm(h) the spine is 14mm. Please
allow an additional 2mm bleed for the bleed area on each
edge.
The overall size of your image should be 277mm (w) x 187mm
(h).
Slimline DVD cases:
Finished size 266mm(w) x 183mm(h). The spine is 7mm. Please
allow an additional 2mm bleed for the bleed area on each
edge.
The overall size of your image should be 270mm (w) x 187mm
(h).